Pim; Interface - Siemens SCALANCE XM-400 Configuration Manual

5.6.12

PIM

5.6.12.1 PIM
On this page, you configure PIM.
Note
PIM is available only on layer 3.
Settings
● PIM Routing
Enable or disable PIM globally on the device.
● Static Rendezvous Point (RP)
Enable or disable depending on whether the device should operate as a static rendezvous
point.
● Bidirectional Multicast
Enable or disable the "bidirectional multicast" functionality globally on the device.
5.6.12.2

Interface

Overview
On this page, you configure PIM interfaces.
Note
PIM is available only on layer 3.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
397