Configuration - Siemens SCALANCE XM-400 Configuration Manual

5.6.7.2

Configuration

Introduction
On this page, you configure the virtual router.
Note
This function is available only with layer 3.
Description of the displayed values
The page contains the following boxes:
● Interface / VRID
Select the ID of the virtual router you are configuring from the drop-down list.
● Primary IP Address
Select the numerically lowest IPv4 address from the drop-down list: If the router becomes
master router, the router uses this IPv4 address.
Note
If you only configure one subnet on this VLAN, no entry is necessary. The entry is then
0.0.0.0.
If you configure more than one subnet on the VLAN and you want a specific IPv4 address
to be used as the source address for VRRP packets, select the IPv4 address from the drop-
down list. Otherwise, the numerically lowest IPv4 address will be used.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.6 The "Layer 3 (IPv4)" menu
367