Siemens SCALANCE XM-400 Configuration Manual page 215

● Combo Port Media Type
This column contains a value only with combo ports.
Shows the mode of the combo port:
– auto
– rj45
– sfp
● Status
Shows whether the port is on or off. Data traffic is possible only over an enabled port.
● OperState
Displays the current operational status. The operational status depends on the configured
"Status" and the "Link". The available options are as follows:
– up
– down
– not present
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– up
– down
● Mode
Shows the transfer parameters of the port.
● MTU (Maximum Transmission Unit)
Shows the packet size.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● Flow Ctrl. Type
Shows whether flow control is enabled or disabled for the port.
● Flow Ctrl.
Shows whether flow control is working on this port.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
You have configured the status "enabled" for the port and the port has a valid connection
to the network.
You have configured the status "disabled" or "Link down" for the port or the port has no
connection.
With modular devices, this status is displayed when, for example, no media module is
inserted.
The port has a valid link to the network, a Link Integrity Signal signal is being received.
The link is down, for example because the connected device is turned off.
Configuring with Web Based Management
5.4 The "System" menu
215