Siemens SCALANCE XM-400 Configuration Manual page 468
Industrial ethernet switches
Hide thumbs
Also See for SCALANCE XM-400:
- Configuration manual (960 pages) ,
- Operating instructions manual (80 pages) ,
- Instructions manual (60 pages)
Table of Contents
Advertisement
Configuring with Web Based Management
5.8 The "Security" menu
● Source MAC
Shows the unicast MAC address of the source.
● Dest. MAC
Shows the unicast MAC address of the destination.
● Action
Shows the action.
– Forward
– Discard
Steps in configuration
Follow the steps below to assign an ACL rule to an interface:
1. Select the interface from the "Interface" drop-down list.
2. Select the ACL rule in the "Add Rule" drop-down list.
3. Click the "Add" button. A new entry is generated in the table.
Follow the steps below to remove an ACL rule from an interface:
Note
active rules
You cannot delete active rules.
1. Select the interface from the "Interface" drop-down list.
2. Select the ACL rule in the "Remove Rule" drop-down list.
3. Click the "Remove" button. The corresponding entry is removed in the table.
468
If the frame complies with the ACL rule, the frame is forwarded.
If the frame complies with the ACL rule, the frame is not forwarded.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Advertisement
Table of Contents
