Redundancy; Spanning Tree - Siemens SCALANCE XM-400 Configuration Manual

5.3.7

Redundancy

5.3.7.1

Spanning Tree

Introduction
The page shows the current information about the Spanning Tree and the settings of the root
bridge.
Description of the displayed values
The following fields are displayed:
● Spanning Tree Mode
Shows the set mode. You specify the mode in "Layer 2 > Configuration" and in "Layer 2 >
MSTP > General".
The following values are possible:
– '-'
– STP
– RSTP
– MSTP
● Instance ID
Shows the number of the instance. The parameter depends on the configured mode.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12
Configuring with Web Based Management
5.3 The "Information" menu
91