The "Layer 3 (Ipv6)" Menu; Configuration - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management

5.7 The "Layer 3 (IPv6)" menu

● Connection Status
Shows the status of the connection.
– Listening
– Connecting
– Established
– Inactive
– Disabled
● Keepalive Interval[s]
Define the interval at which the device sends keepalive messages to the MSDP partners.
● Peer Hold Time Interval[s]
Define the time after which an MSDP connection is terminated if no keepalive messages
are received from the MSDP partner.
● Connect Retry Interval[s]
Define the interval after which an attempt is made to establish a connection. If there is no
MSDP connection to a partner, when the Connect Retry Interval elapses, an attempt is
made to establish a connection.
● TTL Threshold
Define the maximum number of routers that may be passed through on the way to the
MSDP partner (hop count). If the specified value used is exceeded, the frame is discarded.
5.7 The "Layer 3 (IPv6)" menu
5.7.1

Configuration

Introduction
The page contains the overview of the layer 3 functions for IPv6. On this page, you enable or
disable the required layer 3 function.
The functions "IPv6 Routing", "VRRPv3" and "OSPFv3" are only available with Layer 3 (IPv6).
404
The device is waiting for the connection.
Connection establishment
The connection is established.
The connection is not active.
The connection is disabled.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12