Acx6160 Field-Replaceable Units; Acx6160 Front Panel - Juniper ACX6160 Hardware Manual

ACX6160 Field-Replaceable Units

Field-replaceable units (FRUs) are components that you can replace at your site. The ACX6160 FRUs are
hot-removable and hot-insertable. You can remove and replace them without powering off the
ACX6160 or disrupting the routing function.
The ACX6160 allows for two 50 GB serial advanced technology attachment (SATA) solid state drives
(SSD) as a secondary boot drive or for log storage. The SATA SSD is a hot-insertable and hot-removable
field-replaceable unit (FRU). The SSD cover plate is located on the top of the chassis.
Table 3 on page 6 lists the FRUs for the ACX6160 and actions to take before removing them.
Table 3: Required Actions Before Removing a FRU from the ACX6160
FRU
Power supplies
Fan modules
SATA SSD
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.

ACX6160 Front Panel

IN THIS SECTION

ACX6160 Front Panel | 7

ACX6160 Chassis Status LEDs | 8
Required Actions Before Removal
Remove the cable for the power supply unit.
None.
None.
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
6
.