Step 6: Perform Initial Software Configuration; Enter Configuration Mode - Juniper MX204 Quick Start Manual

Figure 19: Connecting a DC Power Cable to an MX204 DC Power Supply

Step 6: Perform Initial Software Configuration

IN THIS SECTION

Enter Configuration Mode | 22

Configure User Accounts and Passwords | 23
Configure System Attributes | 24
Commit the Configuration | 25
This procedure connects the router to the network but does not enable it to forward traffic. For
complete information about configuring the router to forward traffic, including examples, see the Junos
OS configuration guides.
To configure the software:
Enter Configuration Mode
1. Verify that the router is powered on.
2. Log in as the root user. There is no password.
22