Hitachi Compute Blade 500 Series User Manual page 424

item
LPAR manager Pre-State Auto
Screen Activation
LP Options
LP Auto
Shutdown
LP
ErrorWatching
PhyCPU C-
State (>= C3)
USB Auto
Allocation to
LPAR
Save changed
Config Format
LP
Timercounter
Base
Save Time
Config
Activation
Deactivation
and
Reactivation
Screen
Switching
Character
LPAR manager LPAR Name
Screen
Logical Partition
Scheduling
Configuration
Mode(Scd)
Logical
Processor
Number(Pro)
B-4
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Setting items Description
Sets a Yes for restoring LPAR to same
condition as previous LPAR before
rebooting LPAR manager by accident.
Sets a Yes for shutting down when all
LPARs are in deactivated status.
Sets a Yes for detecting a hung-up
state.
Sets an Enable when a save electric
power function enables.
Sets an Enable if you want to enable
USB-Automatic-Attach when LPAR
activated.
Sets an Enable to enable the
configuration
Information auto save function.
Specifies the base for TimerCounter.
*LP TimerCounter Base is displayed
when the timer precision of "TSC" is
lower during operation, you can select
"TSC" or "Cpu Frequency". Select the
smaller one for time-lag. LP
TimerCounter Base is not displayed
when the timer precision of "TSC" is
higher, "TSC" is operated.
Sets an Enable for the time information
auto save function.
Sets a Yes for displaying a confirmation
sub-screen when operating activate.
Sets a Yes for displaying a sub-screen
when operating a Deactivate or a
Reactivate.
Sets a conversion letter of a guest
screen to a LPAR manager screen.
Sets a LPAR name
Sets a shared mode or a dedicated
mode.
Sets a logical processor number.
Setting Item List
Support
default
Version
No 01-0X
or later
No 01-0X
or later
Yes 01-0X
or later
Enable 01-0X
or later
Enable 01-0X
or later
Disable 01-0X
or later
TSC 01-3X
or later
Disable 01-6X
or later
Yes 01-0X
or later
Yes 01-0X
or later
l 01-0X
or later
NO_NAME 01-0X
or later
D 01-0X
or later
1 01-0X
or later