Hitachi Compute Blade 500 Series User Manual page 443

Option
Output in summary format
If the filename option is omitted, the HvmGetPerf command outputs system
operation overview in summary format. The following figure shows an
example output in summary.
The table below describes the information items output in summary format.
Table F-2 outputting items in summary format
Output item
Header Outputs the command version and the time at which
operation overview was output.
LPAR manager Outputs the IP address and identifier of the target
system LPAR manager.
information
LPAR manager Indicates the operating status of the LPAR manager
system system. It shows execution times and busy ratios for
operation all LPARs and LPAR manager system as well as the
information numbers of shared and dedicated CPUs assigned.
Physical Indicates the operating status of the physical
processor processors mounted in the LPAR manager system. It
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
required for fixing an IP address for HvmGetPerf command
when the management server uses the IP address in the
network configuration, where the server is connected to
multiple segments.
HvmGetPerf: 1.5 or later versions
Figure F-1 Output example
Description
HvmGetPerf Command
Description
Type option
Always
all host
all host
all pcpu
F-3