Hitachi Compute Blade 500 Series User Manual page 247

No. Item
(5) Virtual NIC Displays the Logical NIC number.
Number
(6) VNIC Assigns Logical NIC to each LPAR.
Assignment
*: Not assigned
Va - Vd: Displays the identifier for the
network segment of the VNIC.
1a - 8h: Displays the identifier for the
network segment of the shared NIC.
Add "v" to the end of line when using VF
NIC.
(7) VNIC Displays the information on the Logical NIC
Information selected by the cursor.
No: Displays the Logical NIC number.
MAC Address: Displays the MAC address of
the Logical NIC.
Shared NIC#: Displays the shared NIC
number.
Tag: Displays the VLAN mode.
Undef: VLAN mode not defined.
Untag: Defined to the UnTagged port.
Prm: Displays the promiscuous mode.
R: Receives the same MAC address.
T: Received all packets.
VLANID: Displays the defined VLAN ID. See
Table 7-17 VLAN ID on page
Inter-LPAR Packet filtering: Displays the
inter-LPAR packet filter.
Disable: Inter-LPAR packets are transferred
inside LPAR manager; but not transferred
outside LPAR manager.
Enable: Inter LPAR packets are transferred
outside LPAR manager, but not inside LPAR
manager.
Disable (ALL): Inter-LPAR packets are
transferred to both inside and outside LPAR
manager.
[LPAR manager firmware version 01-9X or
later]
(8) Function Displays the function keys that can be used
Key in this screen.
F2: Displays the list of assigned VLAN ID.
F5: Used to set the promiscuous mode.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
TXRATE: Sets a limited transmission
bandwidth of VF NIC.
Default
Value
-
*
Tag: Undef
(Shared
NIC/Virtual
NIC)
Tag: Tag
(VF NIC)
Prm: T
(Shared
NIC/Virtual
NIC)
Prm: R (VF
NIC)
Inter-LPAR
Packet
Filtering:
Disable
7-44.
TXRATE:
10000Mbp
s
Others: -
-
Supported
LPAR
manager
Version
01-0X~
01-0X~
01-0X~
01-0X~
7-43