Hitachi Compute Blade 500 Series User Manual page 357

Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation You cannot change the authentication mode if the virtual COM
console connection mode is SSH.
LPAR manager Aborts the specified process.
operation
What to do Review the specified process.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
The specified LPAR has corrupted in an LPAR Migration,
please try to recover the LPAR.
Since the LPAR has failed due to LPAR migration, it cannot be
operated.
Not allows operation due to the failed LPAR in LPAR migration.
Recover the LPAR for LPAR migration.
The VF is already assigned the maximum assignable times
Device connection/disconnection fails.
Stops LPAR activation.
Or stops device connection/disconnection.
Assign the device that is assigned the LPAR again, and perform
LPAR activation again.
Updating LP firmware, Please try again after it is finished.
LPAR manager shutdown or the [F10] key cannot be executed
because LPAR manager firmware is updating.
Cancels the specified process.
Execute the process again when LPAR manager firmware update
is completed.
Updating LP firmware, Please wait until it is finished.
LPAR manager shutdown is waiting for execution during updating
LPAR manager firmware.
Stops activating LPAR.
Wait for a while until LPAR manager firmware updating is
completed.
Virtual console authentication mode cannot be changed
when virtual console connection mode is SSH.
Messages
to LPARs.
9-23