Hitachi Compute Blade 500 Series User Manual page 217

No. Item
[When NUMA is enabled for the EFI, and
the guest NUMA is disabled]
Sets the Memory Node which is assigned
to LPAR
[When deactivating]
A: When activating the LPAR, the Node
number will be selected automatically
and the free memory will be allocated
ascendingly.
0 to Maximum Node number :
The free memory of the specified Node
is allocated to the activated LPAR
ascendingly. The free memory cannot be
allocated from the other Node.
[When activating]
0 to Maximum Node number :
Shows the displayed Node only has been
assigned.
M: Shows the multiple Nodes are
assigned.
[When NUMA is enabled for the EFI, and
the guest NUMA is enabled]
Displays the Memory Node number
allocated to the LPAR. The Memory Node
cannot be set.
NM: Shows that the guest NUMA is
enabled.
(12) ID Enables/disables the function that
detects the idle state of the logical
(Idle
processors.
Detection)
Y: Enables Idle Detection.
N: Disables Idle Detection.
See Idle Detection in Cautions for the
recommended value for the idle
detection.
(13) AA Sets the automatic activation of an LPAR
when LPAR manager boots.
(Auto
Activation *: Auto Activate is not set.
Order)
1-99: Enables Auto Activate. The
number represents the order in which
the LPARs are activated. Small number
is given priority.
(14) AC Enables/disables the function that
automatically clears the logical SEL.
(Auto Clear)
Y: Enables Auto Clear.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
Y 01-0X~
* 01-0X~
N 01-0X~
7-13