Hitachi Compute Blade 500 Series User Manual page 356

Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
9-22
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Target LPAR is undefined.
The LPAR you tried to manipulate is undefined.
When you tried to change the configuration information of a
virtual NIC, you tried to change an undefined LPAR.
Aborts the specified process.
Retry the specified process.
Target LPAR must be shared mode.
The LPAR for which you tried to make a setting is in dedicated
mode, so you cannot make any settings now.
Aborts the specified process.
Make the setting again after changing the scheduling mode of the
LPAR to shared mode.
The LPAR Migration is in progress.
This LPAR Migration prevents some operations such as
deactivation and LPAR-reconfiguration from performing.
Operation with screen is not allowed due to LPAR migration in
progress.
LPAR migration is being performed.
Wait for a while until the LPAR migration is completed.
The name is used for other group.
When you try to name a group, the name is already used by
another group.
Aborts change in the group name.
Give another name to the group.
The name is used for other LPAR.
An LPAR with the name you set already exists.
Aborts LPAR name change process.
Change the name.
Messages
activation,