Hitachi Compute Blade 500 Series User Manual page 228
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Place the cursor on the VC column of the LPAR line whose virtual COM
console function you want to enable, and then press [F1] to display a sub-
screen. Select a VC number to connect by moving the cursor with the up and
down arrow keys, and then press the [Enter] key.
As a result, you can connect to the LPAR guest screen via telnet. The TCP
port to be used at the connection via telnet can be found in the comment that
appears when pointing VC column of the LPAR line.
Figure 7-6 Virtual Console Mapping Screen
When you press [F1] on this sub-screen, allocation of VC numbers/TCP ports
is displayed.
7-24
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Advertisement
Table of Contents
