Hitachi Compute Blade 500 Series User Manual page 300
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
How to change the LPAR manager system time zone
Enter new system time zone on the sub-screen which is displayed on the
Date and Time screen by pressing F7 key.
Note:
•
LPAR SEL time zone has to be equal to LPAR manager system time zone.
If they are not equal, a wrong time is displayed on LPAR SEL time. The
correct time cannot be recognized if a failure has occurred.
•
Shutdown all the guest OS.
•
Place the cursor on LPAR RTC on the Date and Time screen and press
[Enter] to display a sub-screen. Select "LPAR SEL Time" and press
[Enter].
•
Place the cursor on Time Zone on the Date and Time screen and press
[Enter] to display a sub-screen. Set a "Time Zone" and press [Enter].
•
Place the cursor on Setting on the Date and Time screen and press
[Enter] to display a sub-screen. Select "LPAR RTC" and press [Enter].
7-96
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-68 Changing the LPAR manager System Time-zone
Figure 7-69 Setting of the Time-zone
Operation by LPAR manager Screen
Advertisement
Table of Contents
