Hitachi Compute Blade 500 Series User Manual page 218

No.
(15)
(16)
(17)
(18)
7-14
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
N: Disables Auto Clear.
PC Enables/disables the Processor Capping
function.
(Processor
Capping) Y: Enables the Processor Capping when
using shared logical processors
(The capping fluctuates depending on
the service ratio set by Srv.)
N: Disables the Processor Capping when
using shared logical processors
*: For the logical processor in the
occupation mode, the processor capping
function is invalid.
This item is valid only for the shared
logical processors. And this item is
invalid for the dedicated logical
processors.
VC Enables/disables the virtual COM console
function, or specifies VC number.
(Virtual
(Maximum simultaneous connection
Console)
number is 16)
Y: Enables the virtual COM console.
N: Disables the virtual COM console.
1-16: Specify a VC number of the virtual
COM console with the [F1] key.
PB For CB 520H A1/B1/B2 / CB 520A A1 /
CB 540A A1/B1:
(Pre-boot
Firmware) Sets the pre-boot firmware.
BIOS: Starts the logical BIOS by
activating an LPAR.
For CB 520H B3 / CB 520X B1/B2:
Sets the Pre-boot firmware.
64UEFI: Starts the logical EFI when
activating LPAR.
BIOS: Starts the logical BIOS when
activating LPAR.
Assign Total Displays the total resources on all the
LPARs.
(Total
resources Pro: Displays the total number of logical
allocated to processors.
LPAR)
Shr: Displays the total number of logical
processors in the sharing mode.
Ded: Displays the total number of logical
processors in the occupation mode.
Mem: Displays the total memory amount
in megabytes.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
* 01-0X~
N 01-0X~
BIOS 01-0X~
64UEFI 01-8X~
- 01-0X~