Hitachi Compute Blade 500 Series User Manual page 91

Notes:
1 Required item
.
2 Alphanumerical characters, hyphones (-), and period (.) can be used for this
.
item.
3 Uppercase alphabetic characters can be used.
.
4 Alphanumerical characters, hyphens (-), periods (.), pluses (+), single
.
quotations ('), commas (,), left parentheses ((), right parentheses ()), slashes
(/), colons (:), equals (=), question marks (?), and spaces can be used for this
item.
5 Printable ASCII characters can be used.
.
6 This can be filled in when CSR is created.
.
• Creating LPAR manager server certificate
To create self signed certificate:
A self signed certificate is automatically created at the LPAR manager first
boot. When re-creating the one, use opr HvmServerCertificate
command.
Make sure that a unique common name (CN) is set in the subject
information for a self signed certificate per LPAR manager. To obtain a
created self signed certificate, use get HvmServerCertificate command.
Use opr HvmSecureCmmConfigSave command to save the LPAR
manager configuration information before shutting down or rebooting the
LPAR manager after creating a self signed certificate.
To register certificate signed by CA:
The following flow-chart shows the process of registering through using a
certificate signed by CA.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
System Operation
Description
Locality (L): Up to 60 characters
Organization name: Up to 60 characters
Organization unit (OU): Up to 60
4
characters
Mail address: Up to 60 characters
DN qualifier: Up to 60 characters
Surname: Up to 60 characters
Given name: Up to 60 characters
Initials: Up to 30 characters
Unstructured name: Up to 60
4, 6
characters
Challenge password: Up to 30
4, 6
characters
4
4
5
4
4
4
4
2-19