Hitachi Compute Blade 500 Series User Manual page 232

The following table shows the descriptions of all the items displayed in the
Logical Processor configurations screen.
No.
(1)
(2)
(3)
(4)
(5)
7-28
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-9 Logical Processors Configuration Screen
Table 7-8 Details of Logical Processors Configuration Screen
Item
# Displays LPAR numbers.
Name Displays LPAR names.
Sta Displays LPAR status.
Act (Activate): the power is on.
Dea (Deactivate): the power is off.
Fai (Failure): Not available due to
unrecoverable failure.
Reboot LPAR manager when this happens.
If rebooting LPAR manager cannot solve
the problem, contact the reseller from
which you purchased this equipment or
consult maintenance personnel.
Scd Sets a scheduling mode.
S: Shared mode
D: Dedicated mode
Pro Displays the number of logical processors
assigned to the LPAR.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~
D 01-0X~
1 01-0X~