Hitachi Compute Blade 500 Series User Manual page 273
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Place the cursor on [LP CLI], and then press [Enter]. On the displayed sub-
screen, select [Enable], and then press [Enter]. After the setting is complete,
configuration information for user authentication is stored automatically.
How to set the password expiration date
[LPAR manager firmware version 02-05 or later]
Place the cursor on [Expiry], and then press [Enter]. On the displayed sub-
screen, enter the password expiration date, and then press [Enter]. After the
setting is complete, configuration information for user authentication is stored
automatically.
If this value is changed, the value for [Remain] in [User List] is also changed.
How to set the virtual COM connection method
[LPAR manager firmware version 02-05 or later]
Place the cursor on [Type], and then press [Enter]. On the displayed sub-
screen, select [Telnet] or [ssh], and then press [Enter].
How to re-create a host key to be used for SSH connections to
virtual COM
[LPAR manager firmware version 02-05 or later]
Place the cursor on [Generate Host Key], and then press [Enter]. On the
displayed sub-screen, select [Yes], and then press [Enter].
How to add a user
[LPAR manager firmware version 02-05 or later]
Press [F1] (Add) to display the sub-screen. Enter the user name, and then
press [Enter].
Next, enter the password, and then press [Enter]. Then, re-enter the
password, and then press [Enter]. After the setting is complete, configuration
information for user authentication is stored automatically.
•
You can use alphanumeric characters, periods (.), hyphens (-), and
underscores (_) for the user name. The user name must begin with a
letter.
You can use 1 to 31 characters for the user name.
•
You can use alphanumeric characters and symbols (other than spaces) for
the password.
You can use 1 to 31 characters for the password.
How to delete a user
[LPAR manager firmware version 02-05 or later]
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
7-69
Advertisement
Table of Contents
