Hitachi Compute Blade 500 Series User Manual page 417

LPAR migration
Force Recovery
Middleware HCSM
SC/BSM
SC/DPM
Server installation and monitoring tool
(SIMT) log monitor
Linux high reliability
options
Notes:
1 Emulex 10 Gb NIC has multiple ports per controller. Set the same value of SR-IOV
.
to ports in the controller: Enable or Disable.
2 Emulex 10Gb NIC of different types of firmware cannot be mounted in a server
.
blade.
3 For details about combinations of firmware versions and drivers, see the Hitachi
.
Compute Blade Emulex Adapter User's Guide for Driver.
4 When a guest OS, to which VF NIC is assigned, is rebooted, the following messages
.
may appear in /var/log/messages and in the system event log if SIMT log monitor is
running. They do not affect the guest OS operation.
[/var/log/messages]
be2net 0000:XX:XX.X: Could not use PCIe error reporting
XX:XX.X: Bus: Dev. Func
[System event log]
Timestamp Module Level System event log Message
------------------- ------ ------- -----------------------------
yyyy-mm-dd hh:mm:ss PX Info 007B D2 7400 32 37XX 39FFFFFF An error was
detected in H/W agent.
This appears only when 37XX 39FFFFFF (XX depends on the LPAR number) is
output.
5 When a guest OS enables promiscuous mode to VF NIC, at tcpdump startup for
.
example, the following messages may appear in /var/log/messages and in the
system event log if SIMT log monitor is running. They do not affect the guest OS
operation.
[/var/log/messages]
be2net 0000:XX:XX.X: opcode 34-1 failed:status 3-8
XX:XX.X: Bus: Dev. Func
[System event log]
Timestamp Module Level System event log Message
------------------- ------ ------- -----------------------------
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
14 Shutdown
Concurrent
maintenance
15
Linux Tough
Dump
HA Network
Driver for Linux
HA Logger Kit
for Linux
Setting Item Catalogue
Support (version)
Y (01-9X or later)
-
Y (01-9X or later)
Y (01-9X or later)
(Display only)
-
-
Y (01-9X or later)
Y (01-9X or later)
-
Y (01-9X or later)
A-15