Hitachi Compute Blade 500 Series User Manual page 233

No. Item
(6) Grp Displays a processor group number.
(7) Logical Displays the logical processor number.
Processor
Number
(8) Logical Assigns a logical processor to each LPAR.
Processor
*: Not assigned right now.
Assignment
A: Automatically selects a physical
processor to assign to an LPAR when the
LPAR is activated in shared or dedicated
mode.
Numeric: A physical processor shown as a
number is assigned to an LPAR when the
LPAR is active in dedicated mode. If the
display is other than that, a physical
processor will be assigned to an LPAR
shown as a number the next time the LPAR
is activated in dedicated mode.
(9) Function Displays function keys available on this
Key screen.
[F11]: Scrolls a page to the left and
displays it.
[F12]: Scrolls a page to the right and
displays it.
Results of the LPAR manager screen operations are below.
Table 7-9 LPAR Status on the Logical Processors Configuration Screen
Item
Activate
Name -
Sta -
Scd -
Pro -
Grp -
Logical -
Processor
Number
Logical
1
C
Processor
Assignment
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
LPAR Status
Deactivate Failure
- -
- -
- -
- -
- -
- -
Y -
Supported
Default LPAR
Value manager
Version
0 01-0X~
- 01-0X~
A 01-0X~
- 01-0X~
Supported
LPAR
Remark
manager
Version
Displays Only 01-0X~
Displays Only 01-0X~
Displays Only 01-0X~
Displays Only 01-0X~
Displays Only 01-0X~
Displays Only 01-0X~
- 01-0X~
7-29