Hitachi Compute Blade 500 Series User Manual page 319

No. Item
Dsp(ms) displays the total execution time
of LPARs in shared mode.
Busy(%) displays the busy ratio of all
LPARs in the shared mode. This value is
obtained by the following formula.
Busy(%) = the total execution time of all
LPARs in the shared mode ÷ Service time
of all LPARs in the dedicated mode x 100
(18) LPAR Total Displays various totals of all LPARs.
Dsp(ms) displays the total execution time
of LPARs
Busy(%) displays the total busy ratio value
of all LPARs.
Busy(%) = total execution time of all
LPARs ÷ system service time x 100
(19) SYS1 Displays the execution time and the busy
ratio of the LPAR manager System1.
LPAR manager System1 see the processing
by the kernel of the LPAR manager.
(Note)
The busy ratio and execution time of the
faulty processor isolated are contained in
SYS1.
Dsp(ms) displays the execution time of the
LPAR manager System1.
Busy(%) displays the busy ratio of the
LPAR manager System1.
This value is obtained by the following
formula.
Busy(%) = execution time of the LPAR
manager System1 ÷ system service time x
100
(20) SYS2 Displays the execution time and the busy
ratio of the LPAR manager System2.
LPAR manager System2 see the processes
for the LPAR manager's communication and
service control.
Dsp(ms) displays the execution time of the
LPAR manager System2.
Busy(%) displays the busy ratio of the
LPAR manager System2.
This value is obtained by the following
formula.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
--- 01-0X~
--- 01-0X~
--- 01-0X~
7-115