Hitachi Compute Blade 500 Series User Manual page 230

How to display memory allocation
Press [F2] in the Logical Partition Configuration screen to open the sub-
screen shown below. This sub-screen displays the memory allocation status in
the address ascending order.
The following table shows the descriptions of the items displayed in the
Memory Allocation Display sub-screen.
No.
(1)
(2)
(3)
(4)
(5)
7-26
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-8 Memory Allocation Status Screen
Table 7-7 Details of the Memory Allocation Status Screen
Item
# Serial numbers of memory blocks to be displayed.
Mem Org Displays the start address of the allocated memory in
Addr (Hex) hexadecimals.
The addresses are listed in ascending order. When the Memory
Allocation Display has no more content, "-------- END ------- " will
be displayed.
This screen displays up to 15 memory blocks (the first row on the
first page is taken up by descriptions). If there are more than 15
memory blocks, you will have to scroll using the [Page Up], [Page
Down] to view the display content.
Mem Size This displays the memory size in decimal numbers in units of MB.
Node# Displays a Memory Node number.
Displays "A" when non-NUMA.
Name Displays what is using the memory area indicated by Mem Size
from the address of Mem Org Addr. The meaning of the system
names is shown below.
Operation by LPAR manager Screen
Description