Hitachi Compute Blade 500 Series User Manual page 318

No.
(15)
(16)
(17)
7-114
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
S: The number of physical processors
assigned to the LPAR in the shared mode.
Format is n or m.
n: Total number of physical processors
assigned to the LPAR running properly in
the shared mode
m: Total number of all processors assigned
to LPAR in the shared mode.
(S: = total number of physical processors –
total number of physical processors
assigned to the dedicated mode LPARs)
Grp Selects processor groups to display.
All: Displays the entire system
The number of a processor group: Displays
specified
processor groups
Note: When a processor group number is
specified, information only on the group is
displayed.
Ded LPAR Displays various totals of LPARs in the
dedicated mode.
Total
"---" is displayed for SrvRatio and Srv(%).
Srv(ms) displays the total service time of
LPARs in the dedicated mode.
Dsp(ms) displays the total execution time
of LPARs in dedicated mode.
Busy(%) displays the busy ratio of all
LPARs in the dedicated mode. this value is
obtained by the following formula.
Busy(%) = All execution time of LPARs in
the dedicated mode ÷ All service time of
LPARs in the dedicated mode x 100
Shr LPAR Displays various totals of LPARs in the
shared mode.
Total
SrvRatio displays SrvRatio totals of LPARs
in the shared mode.
Srv(%) displays Srv(%) total value of
LPARs in the shared mode. If the displayed
values include Srv(ms) with '*' in LPARs in
the shared mode, this value has '*'.
Srv(ms) displays the total service time of
LPARs in shared mode. when SRV(%) with
* is included, * is displayed in that value.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
All 01-0X~
--- 01-0X~
--- 01-0X~