Hitachi Compute Blade 500 Series User Manual page 445

Figure F-2 Example outputting in text format
Explanation is shown below about the contents of the text format output.
Table F-3 outputting the contents of the text format
Output item
LPAR manager Indicates the operating status of the entire LPAR
system manager. It shows the identifier of the target LPAR
information manager, LP IP Address, total execution time for all
LPARs, total busy ratio for all LPARs, execution time
for HMV System1, busy ratio for LPAR manager
System1, execution time for LPAR manager System2,
busy ratio for LPAR manager System2, number of
shared CPUs and number of dedicated CPUs, in the
stated order. Execution times are displayed in
millisecond units.
Physical CPU For each physical CPU mounted on the LPAR manager
information system, outputs the physical CPU number, busy ratio,
blade number, socket number, core number and
thread number, in the stated order. Information for
the maximum number of installable CPUs is displayed,
regardless of the number of installed CPUs. For CPUs
not mounted, the busy ratio is shown as "*" and other
items shown as 0.
LPAR Indicates the operating status for each LPAR. It shows
information the LPAR number, LPAR name, number of shared
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
HvmGetPerf Command
Type option
all host
all pcpu
all lpar
F-5