Hitachi Compute Blade 500 Series User Manual page 378

Message Content
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
9-44
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP Loader updated VfcSeed.dat in management module.
This message is displayed when moving the server blade or
adding the server blade into the slot of the server-chassis which
operated LPAR manager in the past.
Synchronized the FRU information and the "Vfc seed information"
which is managed in management module.
None.
This LP F/W is not supported for this blade(Compute Blade
Please install another LP F/W supported for this blade.
XXXX : Server Blade Model
This LPAR manager firmware is not supported for this server
blade.
Please install another LPAR manager firmware supported for this
server blade.
LP logged the EFI-Driver log for Shared FC at expansion
The shared FC driver transferred the log to LPAR manager.
None.
LP logged the EFI-Driver log for Shared FC.
The shared FC driver transferred the log to LPAR manager.
None.
LP recovered from NTP error status.
The NTP time synchronous error status of LPAR manager system
time recovered.
None.
LP restarted a LPAR on the destination blade.
Performed concurrent maintenance and LP restarted a LPAR on
the destination blade.
None.
LP restarted a LPAR on the source blade.
Performed concurrent maintenance and LP restarted a LPAR on
the source blade.
None.
Messages
XXXXXX).
card.