Teaming - Hitachi Compute Blade 500 Series User Manual

Promiscuous Mode
Attention
• Communication with external networks using VLANs Because IEEE802.1Q
tagged packets pass through the external physical switches, it is
necessary to set the VLAN ID used by the virtual network corresponding
to the shared physical NIC to physical switch port at the tagged port.
• Priority control in the IEEE802.1P format Priority control in the
IEEE802.1P format is not supported.
• When using VLAN functions and N+M cold standby at the same time,
attentions are as follows.
Table 1-41 The attentions when using VLAN functions and N+M cold
LAN Switch
DCB Switch

Teaming

Teaming functions which are supported by the Logical NIC is below.
Windows Server
2008
Windows Server
2008 R2
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Setting Item
Switch
Cooperation with "Cm2/Network Element Configuration" is
required.
Uses the AMPP function in DCB Switch.
Table 1-42 OS Supported Teaming Functions
Item Mode
AFT
SFT
ALB
RLB
LA/EC/3ad/Static
Dyn3ad
LPAR manager Functions
Target Port
Port17 Tagged All (This setting cannot be
changed).
Configured to transmit all packets.
Port1 - Port16 - Restricted (default)
Receives only the packets to the
target LPARs(MAC addresses).
- Through
Not supported
standby at the same time
Description
Shared NIC / Virtual
NIC
Y
Y
Y
Y
N
N
Settings
VF NIC
--
--
--
--
--
--
1-47