Hitachi Compute Blade 500 Series User Manual page 283

No.
(12) Select
Setting
Display
(13) Import
Config
(14) TimeSync
(15) NTP Server
1,2
(16) Function
Key
The following table describes LPAR manager screen operations to each LPAR
status.
Table 7-30 LPAR Status on the NTP Server Configuration Screen
Item
LPAR Date Select
and Time Display
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
LPAR name: Adjusts the times of the
specified LPAR.
Select the NTP configuration item.
Setting : Displays Import Config and
TimeSync
NTP : Displays NTP Server configuration
Select Import configuration for NTP.
None : None import for NTP configuration
SVP : Import SVP's value and TimeZone for
NTP configuration
BMC : Import BMC's value and TimeZone
for NTP configuration
Select NTP Server configuration for time
synchronization.
Disable : Does not synchronize time to NTP
server
NTP : Synchronize time to NTP Server 1,2
SVP : Synchronize time to SVP
- Interval of time synchronization is 15
minutes (fixed value).
Configure IP addresses of NTP Servers.
- This item is valid only when "(14)
TimeSync" is "NTP".
- NTP Servers have to be based on NTP
Version 3 or 4.
Displays function keys available on this
screen.
F6: Changes the LPAR manager system
time.
F7: Changes the LPAR manager system
time zone.
LPAR Status
Activate Deactivate
Y Y
Operation by LPAR manager Screen
Description
Failure
Y
Supported
Default LPAR
Value manager
Version
Setting 01-0X~
None 01-0X~
Disable 01-0X~
None 01-0X~
- 01-0X~
Supported
LPAR
Remark
manager
Version
- 01-0X~
7-79