Save Configuration Changed On Lpar Manager Screen - Hitachi Compute Blade 500 Series User Manual
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
•
•
3
Shared FC is assigned below.
.
Save Configuration Changed on LPAR manager Screen
To save settings you have made or changed on LPAR manager screens, go to
the LPAR manager Menu screen and press [F9]: Save Configuration. The
guest timer settings changed on the guest OSs also need to be saved by [F9]
after the change before the LPAR manager shutdown or reboot; otherwise,
the changed values may be lost.
1
Press [F9] (Save Configuration) key on the LPAR manager Menu screen.
.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
vfdID can be selected in the range of 1 to 15 (for an 8Gb FC adapter)
or 1 to 30 (for a 16Gb FC adapter) for each port. However, the same
vfcID cannot be set for multiple LPARs. Also, multiple vfcIDs cannot
be set for one LPAR.
Information display may be different depending on the FC adapter
installed.
Figure 5-43 Shared FC Change Confirmation Screen
Setup of LPAR manager
5-29
Advertisement
Table of Contents
