Hitachi Compute Blade 500 Series User Manual page 379
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP saved configuration.
Saved the configuration information
None.
LP Shutdown State Changed to In Progress.
The shutdown status has changed to In Progress.
None.
LP Shutdown State Changed to Ready.
The shutdown status has changed to Ready.
None.
LP skipped LPAR auto activation process.
"Activate" LPAR was skipped with the auto activate operation.
None.
LP started in safe mode.
LPAR manager started in safe mode. The following operations are
suppressed in safe mode:
•
Saving configuration information
•
Activating the LPAR
Revise the NIC and port settings specified for the management
path, and then exit safe mode.
LP switched a port of the NIC for SVP access.
Change the port of NIC that is for communication between LPAR
manager and management module.
None.
LP System Shutdown Started.
LP System Shutdown has started.
None.
LP system time has successfully synchronized with NTP
LP system time has successfully synchronized with NTP server.
None
Messages
server.
9-45
Advertisement
Table of Contents
