Hitachi Compute Blade 500 Series User Manual page 80

For details about how to set user authentication, see
on page
In SSH connections, an SSH host key is used. An SSH host key is
automatically generated when an instance of LPAR manager with a
firmware version of 02-05 or later starts for the first time. In addition,
you can re-create the key through operation. 2,048-bit fixed RSA keys
can be created as SSH host keys. The length of SSH host keys that can
be created is fixed at 2,048 bits and the key type is RSA.
Setting the virtual COM connection mode for
LPAR manager
Setting the user authentication configuration
for each device that communicates with
LPAR manager
Creating a host key to be used for SSH
connection to the virtual COM of LPAR
manager
Setting the virtual COM console
(connection mode, Telnet user)
Re-creating an SSH host key
Connection method
Setting user authentication
Setting a host key
Notes:
1
.
• Changing TCP Ports
A TCP port to be specified when making a Telnet or SSH connection to an
LPAR guest screen is set to the initial value determined by the LPAR
2-8
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
2-24.
Table 2-2 HVM management command (HvmSh)
Item
Item
Table 2-4 LPAR manager screen
Item
You can switch pages by pressing the F11 and F12 keys on the System
Configuration screen.
System Operation
opr VCConnectType
opr HvmIfAuthentication
opr HvmSshHostKey
Table 2-3 Web console
Resources > Modules > All Modules > Server
Blades > Server Blades x > LPAR > Edit > Edit
virtual COM console settings
Resources > Modules > All Modules > Server
Blades > Server Blades x > LPAR > Edit >
Recreate SSH host key
System Configuration screen
1
> VC Connect
System Configuration screen
> Authentication
System Configuration screen
> Generate Host Key
User Authentication
Operation
Operation
Operation
1
1