Hitachi Compute Blade 500 Series User Manual page 321

Figure 7-84 LPAR Front Panel Status Screen
The following table describes each item on this screen.
Table 7-35 Details of the LPAR Front Panel Status Screen
No. Item
(1) # Displays the LPAR numbers.
(2) Name Displays the LPAR name.
(3) Sta Displays the LPAR power status.
Act (Activate): The LPAR is powered on.
Dea (Deactivate): The LPAR is powered off.
Fai (Failure): The LPAR cannot be used due
to an unrecoverable failure. Reboot the
system when this happens. If rebooting the
system cannot solve the problem, contact
your reseller or maintenance personnel.
(4) Liquid Displays the LPAR's system status and
Crystal error information.
Display
Active : The power is on.
System power-off : The power is off.
Ignite dump : Dump was taken.
MigrationFailed : LPAR migration stops,
which requires LPAR recovery.
(5) Dump Commands a guest OS to collect dump.
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Description
Supported
Default LPAR
Value manager
Version
- 01-0X~
NO_NAME 01-0X~
Dea 01-0X~
- 01-0X~
Void/Dump 01-0X~
7-117