Hitachi Compute Blade 500 Series User Manual page 406

Be sure to use it with NIC mode.
Set "Personality" as <NIC> in Emulex PXESelect Utility.
See the Hitachi Compute Blade Emulex Adapter User's Guide for Hardware for
setting it.
However, it cannot be changed in LP mode. If necessary, change it in Basic mode.
3 In LPAR assigned shared NIC or virtual NIC, the NIC (Intel 82576) is recognized as a
.
1Gbps of NIC on a guest OS.
4 In LPAR assigned shared NIC or virtual NIC, total throughput is about 3Gbps per
.
LPAR manager.
5 Supported in LPAR manager firmware version 02-1X or later.
.
For details about the supported fibre channel adapter versions, see the HITACHI
Gigabit Fibre Channel Adapter User's Guide (Support Matrix Edition).
OSs which LPAR manager supports
OSs which LPAR manager supports are shown in the table below.
Guest OS
CB 520H A1/B1
Guest OS
CB 520H B2
A-4
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
PCI-Device
Table A-3 OSs which LPAR manager supports
Item
Windows Server 2008 SP2
Windows Server 2008 R2
Windows Server 2008 R2 SP1
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 5.7
Red Hat Enterprise Linux 5.9
Red Hat Enterprise Linux 6.2
Red Hat Enterprise Linux 6.4
Red Hat Enterprise Linux 6.5
Red Hat Enterprise Linux 6.6
Windows Server 2008 SP2
Windows Server 2008 R2
Windows Server 2008 R2 SP1
Windows Server 2012
Windows Server 2012 R2
Red Hat Enterprise Linux 5.7
Setting Item Catalogue
Support
Dedicated Shared
Support (version)
Y (01-0X or later)
Y (01-0X or later)
Y (01-0X or later)
Y (01-3X or later)
Y (01-9X or later)
Y (01-2X or later)
Y (01-7X or later)
Y (01-0X or later)
Y (01-5X or later)
Y (01-9X or later)
Y (02-06 or later)
-
-
Y (01-6X or later)
Y (01-6X or later)
Y (01-7X or later)
-
Exclusive
shared