Hitachi Compute Blade 500 Series User Manual page 58

Port Connection
Port Speed
VLAN Mode and VLAN
ID
Promiscuous Mode
• Image of Shared NIC switch
The following example is for 17-ports (1 port/LPAR) layer 2-switch when
the number of LPARs is 16 and 1 shared NIC per LPAR.
– Up to 16 pieces of this switch can be mounted depending on the
number of physical NICs with shared setting.
– Ports 1 – 16 are configured by the shared NICs and Port17 by the
physical NIC port.
1-44
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 1-29 Image of VLAN Switch
Table 1-38 Setting Items for VLAN Switch
Setting Item Target Port
Port1 - Port128
Port1 - Port128
Port1 - Port128
Port1 - Port128
LPAR manager Functions
Settings
Assign to LPAR on the Virtual NIC (VNIC)
assignment screen.
Auto Negotiation (This setting cannot be
changed)
- Supports 1000BASE-TX
[VLAN mode]
- Tagged (default)
- Untagged
Only one (1) VLAN mode per port can be
set
[VLAN ID]
- Tagged : Up to 16 VLAN IDs out of the
range from 1 to 4094, or assign all (ID).
- Untagged: Only one (1) VLAN ID out of
the range from 1 to 4094
- Restricted
Receives only the packets to the target
LPARs(MAC addresses).
- Through (default)
Receives all the packets in the same
network segment.