Pci Device Assignment - Hitachi Compute Blade 500 Series User Manual

Logical partitioning manager
Hide thumbs Also See for Compute Blade 500 Series:
Table of Contents

Advertisement

No.
(6)
(7)
(8)

PCI Device Assignment

The following functions are available in the PCI Device Assignment screen.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
E: Exclusive shared mode
-: Virtual NIC
ID
Displays IDs which are used by the LPAR. (Only case that
scheduling mode of physical NIC is shared mode)
1~15 : vfcID
1a to 8h: Network segment identifier of shared NIC
Add "v" to the end of line when using VF NIC.
(The contents of a display depend on the number of
installed controllers of NIC, and numbers of ports.)
Va to Vd: Network segment identifier of Virtual NIC
Slot
[Host PciConfig]
Displays equipped location of physical PCI devices
('—' are displayed when the virtual NIC are equipped)
[LPAR PciConfig]
Displays equipped location of logical PCI devices.
('—' are displayed when the virtual NIC are equipped)
Seg.Bus.Dev.Fnc
[Host PciConfig]
Displays PCI config address of physical NIC and virtual
NIC.
[LPAR PciConfig]
Displays Config address of logical PCI devices on the
LPAR.
(End character '*' of the PCI config address means that
the physical and logical PCI information are different)
Operation by LPAR manager Screen
Description
7-37

Advertisement

Table of Contents
loading

Table of Contents