Hitachi Compute Blade 500 Series User Manual page 268

No.
(21)
(22)
(23)
Range of settable VNIC System
No
The following table describes each operation on this screen.
Table 7-27 LPAR Status on the LPAR manager System Configuration
Item
LP ID
LP IP
Address
Subnet Mask
Default
Gateway
7-64
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
the current day is displayed as the
expiration date. The number of days
changes at UTC 0:00.
---: There is no expiration date.
Numbers: Displays the number of days
left until expiration.
*: The number of remaining days until
expiration is 14 or less.
Expired: The expiration date has passed.
NaN: The state is other than the above.
Host key Displays the host key to be used for SSH
connection to virtual COM.
Generate Re-creates a host key to be used for SSH
Host Key connections to virtual COM.
User Displays user information.
Information
Name: Displays the name of the user.
Remain: Displays the password
expiration date.
Table 7-26 VNIC System No
Item
Activate
-
-
-
-
Operation by LPAR manager Screen
Description
LPAR manager firmware version
01-01 or later
1 to 128
Screen
LPAR Status
Deactivate Failure
Y -
- -
- -
- -
Supported
Default LPAR
Value manager
Version
--- 02-05~
--- 02-05~
--- 02-05~
01-4x or later
1 to 1024
Supported
LPAR
Remark
manager
Version
- 01-0X~
displayed 01-0X~
only
displayed 01-0X~
only
displayed 01-0X~
only