Hitachi Compute Blade 500 Series User Manual page 293
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
•
Place the cursor on LPAR SEL Time on the Date and Time screen and
press [Enter] to display a sub-screen. Select "LPAR RTC" and press
[Enter].
•
Place the cursor on TimeSynch on the Date and Time screen and press
[Enter] to display a sub-screen. Select "Disable" and press [Enter]. NTP
connection should be disabled, otherwise the timezone cannot be
changed.
•
Press [F7]: Change System Time Zone on the Date and Time screen to
display a sub-screen. Set a time zone and press [Enter].
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-45 Setting of the Time-Zone
Figure 7-46 Set of the LPAR RTC
Figure 7-47 Setting of the NTP Connection
7-89
Advertisement
Table of Contents
