Hitachi Compute Blade 500 Series User Manual page 209

Screen Name
PCI Device Information
PCI Device Assignment
Virtual NIC Assignment
Shared FC Assignment
Allocated FC Information
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
Front Panel
LP system logs
Firmware Version Information
In addition, the relevant sub-screen may be displayed when you select the
setting items (by pressing [Enter]).
Note:
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Usage
Adds, deletes, or changes a processor group.
Displays the PCI device information.
Assigns PCI devices to the LPARs.
Displays the name of the defined LPARs and
their status.
Assigns Logical NICs to the LPARs.
The name and status of the defined LPAR are
displayed.
Assigns the shared mode Hitachi 4Gbps Fibre
Channel adaptor to the LPARs.
The name and status of the defined LPAR are
displayed.
Displays the configuration (WWN) of the FCs
installed in LPAR manager.
Used to configure the LPAR manager system and
set up user authentication.
Displays the service status of the LPAR manager
system.
Sets the LPAR's SEL (System Event Log) time.
Sets the LPAR's RTC (Real Time Clock) time.
Sets the time zone.
Sets the date and time in the LPAR manager
system.
Sets the time zone in the LPAR manager system.
Adjusts the SEL time and RTC time to be the
same as the system equipment time.
The name and status of the defined LPAR are
displayed.
Sets the LPAR manager optional functions.
Displays the usage status of the LPAR manager
system and the LPARs.
Collects Guest dumps and guest screen data.
The name and status of the defined LPAR are
displayed.
Displays various events occurred in LPAR
manager.
Displays firmware version of each component.
7-5