Hitachi Compute Blade 500 Series User Manual page 296
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
•
Place the cursor on LPAR SEL Time on the Date and Time screen and
press [Enter] to display a sub-screen. Select "LPAR RTC" and press
[Enter].
•
Place the cursor on TimeSynch on the Date and Time screen and press
[Enter] to display a sub-screen. Select "Disable" and press [Enter]. NTP
Connection should be Disabled, otherwise the time zone cannot be
changed.
•
Press [F7]: Change System Time Zone on the Date and Time screen to
display a sub-screen. Set a time zone and press [Enter].
7-92
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-55 Setting of the time-zone
Figure 7-56 Selection of the LPAR RTC
Figure 7-57 Changing TimeSync to Disable
Operation by LPAR manager Screen
Advertisement
Table of Contents
