Hitachi Compute Blade 500 Series User Manual page 60

• Image of VF NIC switch
The following example is for 17-ports (1 port/LPAR) layer 2-switch when
the number of LPARs is 16 and 1 VF NIC per LPAR.
– Up to 16 pieces of this switch can be mounted depending on the
number of physical NICs with shared setting.
– Ports 1 – 16 are configured by the VF NICs and Port17 by the physical
NIC port.
Port Connection
Port Speed
VLAN Mode and VLANID
1-46
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 1-31 Image of VLAN Switch
Table 1-40 Setting Items for VLAN Switch
Setting Item
Port1 - Port16
Port17
Port1 - Port16
Port17
Port1 - Port16
LPAR manager Functions
Target Port
Assign to LPAR on the Virtual NIC
(VNIC) Assignment screen.
Connect to physical cables.
With the Onboard NIC, no cable is
required.
Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
Auto Negotiation (This setting cannot
be changed.)
- 10GBASE-KR
- 1000BASE-KX
[VLAN mode]
- Tagged (default)
- Untagged
Only 1 VLAN mode can be set per
LPAR.
[VLAN ID]
- Tagged : Assign all (ID).
- Untagged : Only one (1) VLAN ID
out of the range from 1 to 4094
Settings