Hitachi Compute Blade 500 Series User Manual page 367

Logical partitioning manager
Hide thumbs Also See for Compute Blade 500 Series:
Table of Contents

Advertisement

Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Message Content
Explanation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP changed NIC to dedicated mode and LPAR configuration
A NIC exists for which the mode was changed into the dedicated
mode because the number of shared NICs exceeded the
maximum by changing the scheduling mode of the NIC specified
as the management NIC to the shared mode. Shared allocation of
the NIC to LPARs was released.
LPAR manager has shifted to the safe mode. Confirm the NIC
allocation to LPARs, change the setting of allocation to LPARs if
required, and then release the safe mode.
LP could not import Time Setting of SVP.
Importing Time setting from management module failed.
Check if the version of management module consist with a
cooperation NTP version.
re-import a time setup from a management module after
correcting a time setup of a management module.
LP detected a lack of I/O interrupt vectors.
LPAR manager detected a lack of interrupt vectors.
Check the PCI device configuration. If a PCI device not supported
by the product exists, remove it from configuration.
When only one dual-core processor is installed in the server blade
CB 520H A1/B1/B2/B3 model, set "Enable "to the Hyper-
Threading.
If this action takes no effect, contact the reseller from which you
purchased this equipment or consult maintenance personnel.
LP detected AP initialization timeout.
A timeout occurred in initializing the guest OS.
Review the service rate allocation to the LPAR.
LP detected Driver Ver Error for Shared FC at expansion
The FC driver not supporting shared FC was detected.
Upgrade the driver to the version supporting shared FC.
LP detected Driver Ver Error for Shared FC.
The FC driver not supporting shared FC was detected.
Upgrade the driver to the version supporting shared FC.
Messages
was changed.
card.
9-33

Advertisement

Table of Contents
loading

Table of Contents