Hitachi Compute Blade 500 Series User Manual page 236

No.
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
7-32
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
MXX: The physical processor is possible to
run at a
moderate.
M01 is the fastest; as the number of a
processor increases, its rate decreases.
LOW: The physical processor is running at
the lowest rate
FAI: The physical processor is in failure
state.
ERR: The physical processor is in error
state.
OFF: The physical processor is in off-line.
Group# Sets the number of a processor group.
Schedule Displays the scheduling mode of a physical
processor.
D: Dedicated mode
S: Shared mode
Freq(GHz) Displays the current clock frequencies of
the physical processor.
The current clock frequencies of physical
processors might not run at the maximum
rate when a power capping function is
enabled, Turbo Mode is enabled or
processors are idle.
Node# Displays the Node number of a physical
processor.
'-' is displayed when Non-NUMA setting is
set.
Group# Displays the number of a processor group.
Name Sets a processor group name.
Maximum character length of processor
group name is 31. And identical processor
group name cannot set to 2 or more files.
The 7th character is changed to tilde '~'
and the later characters are omitted when
the length of processor group name is 8 or
more.
'0' ~ '9', 'A' ~ 'Z', 'a' ~ 'z', '-'and '_' can be
used for processor group name. However
only 'A' ~ 'Z' and 'a' ~ 'z' can be used for
the initial character.
Total Core Displays the number of total cores.
Shr Core Displays the number of cores in shared
mode.
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
0 01-0X~
D 01-0X~
- 01-0X~
- 01-2X
0 01-0X~
NO_NAME 01-0X~
- 01-0X~
- 01-0X~