Hitachi Compute Blade 500 Series User Manual page 437

Figure E-3 Example of 4 LPARs Configuration
In example screen, all parameters for LPAR are set in default values except 3
parameters in the table below.
Table E-1 Example of 4 LPARs Configuration
LPAR No.
LPAR1 aSRV001
LPAR2 bSRV002
LPAR3 cSRV003
LPAR4 dSRV004
Virtual NIC Assignment
Example screen of Virtual NIC Assignment is below. Shared NICs (VNIC ID:
1a through 6b) correspond to port of physical NICs one-to-one. Therefore
configurable range of the VNIC IDs depends on configuration of physical
NICs. Configurable VNIC IDs can be confirmed on the sub-screen which is
displayed by selecting configuration of VNCI ID.
In this example, "VNIC ID: 1a through 4b" are set to 4 LPARs.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LPAR Name Processor (No.)
Shared (4)
Shared (4)
Shared (4)
Shared (4)
System Configuration
Amount of Memory
2048MB
2048MB
2048MB
2048MB
E-3