Hitachi Compute Blade 500 Series User Manual page 345

Message Content
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Count Over Shared NIC Config.
Reconsider the specified process.
Device Assign error.
LPAR activation fails.
Or device connection/disconnection fails.
If activating the LPAR, stops activation. If changing the device
target, stops connecting or disconnecting the device.
Deactivate the relevant LPAR, reassign the device that has been
assigned to the LPAR, and then reactivate the LPAR.
Or check that a device that not supported in dedicated mode is
assigned.
Device Schedule Mode is not Exclusive Shared.
The schedule mode of the target PCI device is not exclusively
shared.
Aborts the specified process.
Select a PCI device with the exclusively shared mode (Schd:E).
An error in the characters you typed caused the setting process to
fail.
Aborts character setting.
Revise the entry restrictions.
Failed to save LP configuration
The process of saving the configuration failed.
Aborts the specified process.
Check the Internal Path State on the system service state screen.
If Link is shown as No or Connect as Fail, check the internal LAN
switch settings.
Go to Shared FC Assign on Type=F & Schd=S.
The device is a shared FC, so you need to change it on the PCI
Device Assignment screen.
Aborts the specified process.
Make the setting on the Shared FC Assignment screen.
Messages
Error Character
9-11