Hitachi Compute Blade 500 Series User Manual page 248

No.
Tagged
Untagged
The following table describes each operation on this screen.
Table 7-18 LPAR Status on the VNIC Assignment Screen
Item
Name
Sta
#VNIC
VNIC Number
VNIC Assignment
[PageUp]/[PageDown]
VNIC MAC Address
Information
Tag
(Shared NIC/
Virtual NIC)
Prm
VLANID
Inter-LPAR
Packet
Filtering
7-44
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
F6: Used to change MAC addresses.
F7: Used to set the VLAN mode.
F8: Used for setting Inter-LPAR Packet
Filtering.
[LPAR manager firmware version 01-9X or
later]
F9: Sets a limited transmission
bandwidth of VF NIC by a 100 Mbps in
the range 100Mbps to 10000Mbps.
VLAN Mode
Up to 16 IDs from 1 to 4094, or All (IDs)
Only "All" (all ID) can be specified when VF NIC is assigned.
One ID from 1 to 4094.
LPAR Status
Activate Deactivate
N N
N N
N N
N N
N Y
N N
N Y
Y Y
Y Y
Y Y
Y Y
Operation by LPAR manager Screen
Description
Table 7-17 VLAN ID
VLAN ID
Failure
N
N
N
N
N
N
N
N
N
N
N
Supported
Default LPAR
Value manager
Version
Supported
LPAR
Remark
manager
Version
Display Only 01-0X~
Display Only 01-0X~
Display Only 01-0X~
Display Only 01-0X~
- 01-0X~
Display Only 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~
- 01-0X~