•
Press [F7]: Change System Time Zone on the Date and Time screen to
display a sub-screen. Set a time zone and press [Enter].
•
Adjust the time of LPAR using Adjust LPAR Time on the Date and Time
screen.
•
Save the configuration using [F9]: Save Configuration on the Menu
screen.
Figure 7-73 Saving of the LPAR manager Config
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Figure 7-70 Selecting of the" LPAR RTC"
Figure 7-71 Setting of the Time-zone
Figure 7-72 Selecting of the "ALL LPAR"
7-97