How to release the safe mode
[LPAR manager firmware version 02-1X or later]
Place the cursor on Safe Mode and press Enter to display the subscreen.
Select Yes and then press Enter.
How to collect the LPAR manager dump
Place the cursor on 'Execute' of "Take LP Dump", and press [Enter] to open a
sub-screen. Enter the new character on the sub-screen, and press [Enter]. To
display the confirmation prompt sub-screen, select 'Yes'. Details of them see
LPAR manager Dump
Collection.
Figure 7-79 Confirmation Screen for "Take LP Dump"
How to skip the confirmation prompt sub-screen when activating an
LPAR
Place the cursor on "Activation" below "Confirmation", and press [Enter] to
display a sub-screen. Place the cursor on 'No', and press [Enter]. To display
the confirmation prompt sub-screen, select 'Yes'.
You can also stop displaying the confirmation prompt sub-screen by
activating the LPAR, selecting "Continue: Don't show this message" on the
confirmation prompt sub-screen and pressing [Enter].
Figure 7-80 LPAR Activation Confirmation Screen
7-109
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide