Hitachi Compute Blade 500 Series User Manual page 44

Level
Info
Warn
Warn
ID
0xFF40 Warning
0xFF41 error
0xFF42 Warning
0xFF43 Information LP started, with the specified ports set as the LP management NIC
0xFF44 error
0xFF45 Warning
0xFF46 Information An event occurred on the management NIC port.
Safe mode
• If an LPAR exists for which the NIC allocation is released, LPAR manager
starts in the safe mode. In the safe mode, the following operations are
suppressed:
¢
¢
If LPAR manager changes to the safe mode, confirm the ports specified as
the management path and the configuration of the LPAR for which
allocation is released, and modify the configuration if needed.
After confirming the LPAR configuration, release the safe mode and then,
if needed, save the configuration. Alternatively, if the ports specified as
the management path are incorrect, shut down LPAR manager and then
specify the correct ports.
In this case, the "Auto Activate" setting of the LPAR is also suppressed.
The LPAR for which "Auto Activate" is set is not automatically activated
after the safe mode is released. Activate the LPAR manually, or restart
LPAR manager and then execute the "Auto Activate" function.
• If the migration source or target of LPAR migration is in the safe mode,
you cannot execute the migration.
• You can display the safe mode status or release the safe mode by the
following operations:
1-30
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LP changed NIC to dedicated mode.
LP changed Management Path and LPAR configuration was changed.
LP changed NIC to dedicated mode and LPAR configuration was changed.
Table 1-25 HCSM Alert Messages
Level
The scheduling mode for a NIC assigned to an LPAR was changed.
An error event on a management NIC was detected.
A warning event on a management NIC was detected.
ports.
An error event occurred on the management NIC port.
A warning event occurred on the management NIC port.
Activating LPARs
Saving the configuration
LPAR manager Functions
Message
Message