Hitachi Compute Blade 500 Series User Manual page 344
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
What to do
Message Content
Explanation
LPAR manager
operation
9-10
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Can not change LP System Time due to NTP enabled.
LPAR manager system time cannot be changed due to NTP
enabled..
Aborts the specified process.
Deactivate the NTP, Change the LPAR manager system time.
Can not change timezone of LP System Time due to NTP
LPAR manager System time zone cannot changed due to NTP
enabled
Aborts the specified process.
Deactivate the NTP, Change the LPAR manager system time zone.
Cannot remove the last user.
You cannot remove the last user.
Aborts the specified process.
Review the specified process.
Change LP IP Address
The LP IP Address needs to be changed (to something other than
0).
Waits for the LP IP Address to be changed.
Change the LP IP Address.
Change VNIC System No
The virtual NIC System Number needs to be changed (to
something other than 0).
Waits for the virtual NIC System Number to be changed.
Change the virtual NIC System Number.
Count Over Shared NIC Config.
The scheduling mode cannot be changed to shared mode, due to
exceeding the upper limit of shared NIC.
Aborts the specified process.
Messages
enabled.
Advertisement
Table of Contents
